Tips on How to Unclog Basement Drains

A flooded basement is one of the most terrifying scenarios a homeowner can have. Not only is it costly to rebuild damaged walls, floors, and ceilings, but anything stored beneath them may also be irrevocably harmed. You can’t afford to have your pricey golf equipment or your ancient record collection wrecked, no matter where it is. And it is for this reason that all precautions should be made to avoid this dreadful outcome. Before your basement floods, use these steps to unclog a clogged drain, you can try these out.

Take a deep breath first; even without a plumber, this is a scenario that can be resolved. Find a bucket and remove all standing water with gloves on to gain access to the floor drain. Also, make certain that no one in the house is running any water. The floor drain is usually the final one before the house’s finish, allowing water from all other pipes to trickle through before leaving the premises.

Basement drains typically feature a clean out access point for this reason. Remove the clean out plug with a crescent wrench. Take a few feet of plumber’s snake and pull it out. Fill the drain with hot water and slowly push the snake down until it meets resistance. The water should assist push the snake’s fragmented pieces away. Also, only turn the snake in a clockwise direction. This not only makes it operate like a corkscrew, piercing any bits it comes across, but it also increases the snake’s lifetime.

Chemical clog removers should be avoided because they might be dangerous if applied incorrectly or too frequently. You’ll encounter resistance as you continue to drive the snake in. There’s always more than one obstacle, so keep pushing until you succeed.

But be cautious! If you press the snake a few times and still encounter resistance, the blockage could be more serious than hair or cloth. You don’t want to force a solid object inside the pipe any deeper. Wind the crank slowly to pull the snake out of the pipes. With the restoration of the crank, there’s a good chance that waste will emerge at this point. That’s why you’re wearing gloves. Simply throw it away after depositing it in the bucket.

Hopefully, you were able to clean the clogged pipes completely. In this situation, flush the pipes with hot water to rid them of any leftover debris. Hot water acts as a lubricant for your pipes, so running it through your system after unclogging a drain is always a smart idea. If the clog persists, repeat the steps above until the problem is resolved.